Ignition Boxes & Accessories

Street Fire Ignition Control

The Street Fire Ignition offers capacitive discharge technology and will fire a series of multiple sparks that last for 20° of crankshaft rotation when the engine is running at lower rpm. This ensures combustion of the air/fuel mixture and produces great...

Digital 6A Ignition Control

The Digital 6A wiring is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The Digital 6A are supplied with the wiring harness and the components you’ll need for...

Digital 6AL Ignition Control

The 6AL Ignition Control wiring is routed out one end of the unit through a sealed and locking connector. This eases installation and keeps your wiring looking neat and clean. The built-in rev limiter of the 6AL is located right on top of the housing for...

Timing Light Mount

Mount to firewall and use for power supply for your timing light.

Spark Plug Wire Sync Kit

This Spark Plug Wire Sync Kit installs to the number one spark plug wire and senses the trigger signal and sends this information to the Ignition through a fiber optic cable. Features:• For cylinder per cylinder managementClick here to download the...

Programmable Digital-7 Plus Ignition

The Programmable Digital-7 Plus Ignition includes all of the standard programmable features such as Individual Cylinder Management, Step Retards, Rev Limits, and Shift Points. A MAP sensor is required for the boost circuit. The Ignition is supplied with...

Power Grid Harness Adapter, Power Grid Controller to Digital-7 Programmable

The Power Grid Harness Adapter allows you to use your Digital-7 Programmable to install a Power Grid Controller with very little alterations. The harnesses are direct plug-ins for existing wires, but will need two new wires to run if you desire to use...

Power Grid Replacement Harness

This Power Grid replacement wiring harness is designed for use with the MSD-7730 Power Grid Controller.

Power Grid Advanced RPM Control Module

This Advance RPM Control Module sets rpm limits based on rpm acceleration or time since launch. Features:• Plugs into CAN-Bus Bridge• Use with Power Grid Controller• 4-Connector CAN-Bus Hub is required Note: Please make sure your MSD-7730 Power Grid...

Power Grid System, Controller Only

The Power Grid Ignition System is the next evolution of our Programmable 7-Series Ignition Controls. The Grid incorporates an efficient 32 bit microcontroller and an all new software program, called MSD View, and is USB compatible. The Windows based...

7AL-3 Ignition Control

The 7AL-3 allows you to make adjustments any time you want. It packs high voltage with four step retards, three rev limits and an rpm switch. All of the features are adjusted using plug-in modules including the 3-Step Rev Control and Multi-Step Retard...

7AL-2 Plus Ignition Control

You’ll recognize the 7AL-2 Plus Ignition Control, as its predecessor is the most popular ignition control used in drag racing. The “Plus” model updates the original 7AL-2 with improved internal components with an added a 2-Step Rev Control and diagnostic...