Electrical, Ignition & Data Systems

Cap-A-Dapt Kit, Fixed Rotor

Spark plug style terminals are used on the cap for tight connections that will not vibrate loose. The MSD Cap-A-Dapt adapts a large, Ford style cap onto your MSD distributor. This large cap spaces the spark plug terminals farther apart which lessens the...

Fixed Rotor, for MSD-8445

Replacement Rotor - Fits MSD-8445 MSD Distributor Rotors are molded form high quality, voltage insulating material to resist carbon tracking while ensuring that the ignition spark reaches the spark plug terminals. For optimum voltage carrying...

GM HEI Distributor Cap & Rotor, Red

Replacement cap and rotor for GM HEI The cap and rotor of any ignition system must be considered mainte­nance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set.

GM HEI Distributor Cap, Red

Red, stock GM HEI distributor cap. Features:• Stock GM HEI replacement distributor capClick here to download the MSD-8411 GM HEI Distributor Cap instructions.

Distributor Cap & Rotor, GM External Coil

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. Features: • Fits stock distributor

Mitsubishi Dodge Coil, 1996-ON

Bolt-on performance with increased output for your Mitsubishi/Neon/Talon/Mini MSD offers these two 4-tower coils as replacements for a variety of years ranging from 1994-2003 on vehicles including Mitsubishis, Neons and oth­ers. Note: Some OE coils use...

Coil Ballast Resistor 0.8 OHM

For use with an MSD Blaster Coil when connected to a stock points ignition system. The ballast is not necessary if an MSD 6 or 7-series Ignition Control is being used with the points distributor. Features:• Use with older points style ignitions

Dual Plug Wire Separator Kit, 8 - 8.5 mm

Not only do separators have to keep spark plug wires away from engine heat sources, they also have to keep the plug wires far enough apart to prevent inductive crossfire and actual spark loss. Features:• No tools needed• Stand alone or can be bolted...

Timing Tapes for Harmonic Balancers

Accurate ignition timing is one of the most vital adjustments you can make to your engine. Proper timing can mean the difference between winning and losing a race or even blowing an engine (as a worst case scenario). Recognizing the importance of the...

Super Conductor Spark Plug Wire Set, Multi-Angle Plug, HEI Cap

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them...

Pro Clamp Wire Separators

The Pro-Clamp will keep the plug wires in a tidy order and away from engine heat sources. Each separator features secure grooves for each wire and a top bracket snaps in place to sandwich the wires in place. Each base has a hole for a retaining screw if...

Ride Height Sensor, New Style

The 810-SN-RHB2 Ride Height Sensor accurately measures ride height of any vehicle. It has a working range between 1" and 11.8" from the ground, and is compatible with Racepak V-Net and PRO series data loggers.Replaces the discontinued ride height sensor...