Wheel Accessories

Lug Nut Torque Extension Tool, 7/8 in. Socket

Lug Nut Torque Extension Tool, 7/8 in. SocketTorque down the lugs on your rear drag wheels without using multiple extensions.Specifications:• Length: 20 in.• Socket Size: 7/8 in.• Finish: Plated

Delta-1 PM1/PS1 Beadloc Titanium Stud Assembly

5/16 Beadloc Titanium Hardware for Delta-1 PM1/PS1 Wheels. Includes:• Qty-1 Titanium stud• Qty-1 Titanium spherical washer• Qty-1 ARP SS 12-point nut

Delta-1 PM1/PS1 Beadloc Titanium Hardware Kit

5/16 Beadloc Titanium Hardware Kit For Delta-1 PM1/PS1 Wheels. Kit is for 1 ring. Kit Includes:• Qty-18 Titanium studs• Qty-18 Titanium spherical washers• Qty-18 ARP SS 12-point nuts

1/2" Wheel Spacers for 1/2" Studs

Our wheel spacers are manufactured in house on our water jet machine. Holes are set up for use with 1/2" diameter drive studs. For use with 4-1/2", 4-3/4", and 5" bolt circles. Specifications:• OD: 6"• Material: Aluminum • Thickness: 1/2" Sold in pairs.

Valve Stem, Drag Liner

This valve stem requires a 21/64 drill bit and 1/8-27 NPT tap to install. When installing, go about 3/4 of the way through with the tap so the NPT threads will tighten up properly. Use thread sealer tape and tighten stem into wheel.Qty-1 required for...

5/8"-18 Stud Kit with 1.500" Wide Shank, Includes Lug Nuts & .438" Thick Washers

For Axles Drilled And Tapped 5/8″-18 Kit Includes:5/8″-18 Chrome Moly Studs– Threads are rolled for maximum strength– Internal 1/4″ hex to facilitate installation– Zinc Phosphate coated to resist corrosion– .686″ OD x 1.500″ wide shoulder to properly...

5/8"-18 Stud Kit with 1.187" Wide Shank, Includes Lug Nuts & .438" Thick Washers

For Axles Drilled And Tapped 5/8″-18 Kit Includes:5/8″-18 Chrome Moly Studs– Threads are rolled for maximum strength– Internal 1/4″ hex to facilitate installation– Zinc Phosphate coated to resist corrosion– .686″ OD x 1.187″ wide shoulder to properly...

5/8"-18 Stud Kit with .875" Wide Shank, Includes Lug Nuts & .438" Thick Washers

For Axles Drilled And Tapped 5/8″-18 Kit Includes:5/8″-18 Chrome Moly Studs– Threads are rolled for maximum strength– Internal 1/4″ hex to facilitate installation– Zinc Phosphate coated to resist corrosion– .686″ OD x .875″ wide shoulder to properly...

5/8"-18 Stud Kit with .775" Wide Shank, Includes Lug Nuts & .250" Thick Washers

For Axles Drilled And Tapped 5/8″-18 Kit Includes:5/8″-18 Chrome Moly Studs– Threads are rolled for maximum strength– Internal 1/4″ hex to facilitate installation– Zinc Phosphate coated to resist corrosion– .686″ OD x .775″ wide shoulder to properly...

1/2"-20 x 3" Screw-In Stud Kit

For Axles Drilled And Tapped 1/2″- 20 Kit Includes:1/2″-20 x 3″ Grade 8 Fully Threaded Bolts– Threads are rolled for maximum strength– Thin .200″ hex head provides additional clearance– 3/4″ wrench size .0625″ Hardened Washers– Prevents galling– Ensures...

1/2"-20 x 2" Screw-In Stud Kit

For Axles Drilled And Tapped 1/2″- 20 Kit Includes:1/2″-20 x 2″ Grade 8 Fully Threaded Bolts– Threads are rolled for maximum strength– Thin .200″ hex head provides additional clearance– 3/4″ wrench size .0625″ Hardened Washers– Prevents galling– Ensures...

.250" Aluminum Spacer Washers

Used in Strange 5/8″ stud kitsProtects wheel face from lug nut damagePrevents lug nut from bottoming out on stud shoulder 6061-T6511 Billet Aluminum• Strong & lightweight• Premium material protects from deformation under heavy clamping loads• Clear...