RPM Sensors

Wheel Speed Sensor, 3-Pin, 3/8" dia.

This speed sensor is commonly used to detect either Drive Shaft (ring gear) RPM or Front Wheel RPM. This sensor has a 3/8" fine thread pitch and is triggered using ferrous (steel) material.

Zero Crossing TDC Sensor, 3-Pin, 3/8" dia.

Zero Crossing TDC Sensor, 3-Pin 3/8" dia. This speed sensor is used to pick up Top Dead Center (TDC) on the front hub of the engine. It is designed specifically for use with MSD-style crank trigger wheel and magnets. It must be used with a RPM input...

Clutch RPM Module with Sensor

This V-Net module and sensor allow units with a clutch RPM pickup on the harness to add clutch (input shaft) RPM monitoring to determine both clutch slip and transmission slip. Comes with zero-crossing RPM sensor, magnet and V-Net module. For a function...

Proximity Sensor

Magnetically triggered switch normally open and closed with magnet passage. Same as supplied with Racepack Computer Systems. Fits 3/8" diameter hole in mount bracket.

Driveshaft RPM Sensor, 3-Pin, 5/16" dia.

This speed sensor is commonly used to detect Drive Shaft RPM or Wheel RPM. This metal sensor has a 5/16" fine thread pitch and is triggered using magnets. Works with the following Racepak data loggers and dashes:• Sportsman• IQ3 Drag• V300SD• V500SD

Driveshaft RPM Sensor, 2-Pin, 5/16" dia.

This speed sensor is commonly used to detect driveshaft RPM or wheel RPM. This plastic sensor has a 5/16" fine thread pitch and is triggered using magnets. Works with the following Racepak data loggers and dashes:• Pro 1B / Pro II• V300• V500

Clutch RPM Sensor, 3-Pin, 3/8" dia.

Zero Crossing RPM Sensor, 3-Pin 3/8” dia. This non-powered sensor is designed for monitoring magnetic pulses. It must be used with an RPM input designed for a zero crossing sensor. This speed sensor is used to pick up Clutch (input shaft) RPM. It is also...